Prepare Product Location; Shipping Box Space Requirements; Unpacking Space Requirements - HP invent LaserJet 9040mfp Inbetriebnahme

Step 1. Prepare product location

Shipping box space requirements

Make sure that your building has a door or receiving area large enough for delivery of the
shipping box. The approximate dimensions of the shipping box are as follows:
1016 mm wide x 914 mm deep x 1148 mm tall (40 inches wide x 36 inches deep x 57 inches
tall).

Unpacking space requirements

Before removing the plastic wrapping from the shipping box, make sure that you have enough
space to remove the contents from the shipping box, and then roll the product down off its
shipping pallet. HP recommends at least 3 meters (10 feet) of space around the shipping box to
remove all of the shipping materials.
6 Product Setup ENWW