HP invent LaserJet 9040mfp Inbetriebnahme Seite 10

1
The smaller measurement is the space that is required to extend the stacker or stacker/stapler with
the attachment bar still attached to the latch under Tray 4. The larger measurement is the space that
is required to remove the stacker or stacker/stapler from the product. The additional space allows
enough clearance to remove the attachment bar from the latch under Tray 4.
2
This measurement is the space that is required for Tray 1 when it is fully extended for 11 x 17/A3-
size media.
3
This measurement shows the depth of the product, including the edge of the control panel and the
standoffs from the Tray 4 casters.
4
This measurement is the space that is required to fully extend Tray 2 or Tray 3.
HP LaserJet 9040mfp and 9050mfp dimensions with the optional 3000-sheet stacker or
the optional 3000-sheet stacker/stapler and the ADF lid open (top and side views)
8 Product Setup
1105 mm (44 in)
1
1201 mm (47 in)
533 mm
(22 in)
648 mm
554 mm
1
(22 in) (26 in)
643 mm 457 mm
2
(25 in) (18 in)
457 mm
643 mm
(18 in)
(25 in)
ENWW