Using The Aux Input; Line In; Using Usb/Sd Input; Bluetooth Mode - THOMSON DS401 Bedienungsanleitung

4. Once you find a station you want to save, press the MEM button on the remote
control, "P01" will be shown on the display, press M-up or M-dn until the desired
memory position number appears on the display. Press the MEM again to confirm and
save the current station.
Using the Line in or AUX Input
Analogue sound signals from other sources can input to the speaker. To select the Aux function
button on the tower or repeatedly press the source button on the remote control until the
displace shows AUX or LIN.
Line in Jack
Requires a 3.5mm cable
1. Connect a 3.5mm cable to the Aux in 1 jack. Connect the other end of the 3.5mm cable to an
Mp3 player or other audio source.
2. Press the power button to turn the unit on.
3. Press the function button or source button on the remote to switch
to Line In mode.
4. Use the controls on the connected device to begin playing audio routed through the unit.
AUX In Auxiliary Input RCA
Requires an RCA cable
1. Connect an RCA cable to the Auxiliary Input. Connect the other end of the RCA cable to the
audio output on your DVD player, stereo system, gaming system or television.
2. Press the power button to turn the unit on.
3. Press the function button or the SOURCE button on the remote
control to switch to Aux In 2 mode.
4. Use the controls on the connected device to begin playing audio
routed through the unit.
Using the USB/SD input
1. Plug your USB flash drive/Secure Digital Memory Card to the USB/SD converter, then
connect the converter to the unit. Change the sequence may cause damage to the iPhone/iPod
dock.
2. Press function once into the USB mode, the unit can play automatically.
3. Press function twice into the SD mode, the unit can play automatically.
4. Press MENU UP /MENU DOWN to select which folder you want to open. The display will
shows the number of folder first, Otherwise the number of track.
5. Press PREVIOUS/NEXT to select track.

Bluetooth Mode

A. Pairing with a Bluetooth cell phone
Please make sure your cell phone is Bluetooth-enabled. Specific pairing steps may vary with
different cell phones. Please refer to the user manual of your cell phone for further information.
The general pairing steps are as follows:
a) Keep DS401 and Bluetooth cell phone within 1 meter when pairing.
- 6 -