Package Contents - Axis Communications P33-VE Serie Installationsanleitung

AXIS P33-VE Series Network Camera Installation Guide
AXIS P33-VE Series Network Camera
Follow these instructions to install the network camera
1. "Package contents" on page 5
2. "Hardware overview" on page 6
3. "Install the hardware" on page 7
4. "Assign an IP address" on page 11
5. "Set the password" on page 14
6. "Adjust the Lens" on page 16
7. "Complete the installation" on page 17
Notes:
• Before you begin, make sure that the package contents, power supply, and the required cables, tools, and
documentation are available. See Package contents below.
• This network camera is intended to operate with PoE; if not available use Axis PoE Midspan 1 port (not
included)

Package contents

Item
Network camera
with heating module
Mounting bracket
Dome covers
Cable shield
Weather shield
Labels
Mounting kit
CD
Printed Materials
Optional accessories
Installation Guide
Models/variants/notes
AXIS P3343-VE
AXIS P3344-VE
AXIS P3346-VE
AXIS P3367-VE
Clear transparent cover
Smoked transparent cover
2 adhesive serial no. labels
Resitorx screw driver, drill template, 5-meter network cable with gasket
4 screws and plugs, 2 long screws, 2 M4x8 screws
1 gasket, terminal block connector
AXIS Network Video Product CD including product documentation,
installation tools and other software
Installation Guide (this document)
Axis Warranty Document
AVHS Authentication key
See www.axis.com for information on available accessories
Important!
This product must be used in
compliance with local laws and
regulations.
Page 5