Before Using; Filling Water - Hisense RB400D4AD2 Benutzerhandbuch

15
Accessories 2)
It is only applicable to the appliance with
dispenser.
Water Dispenser
The water dispenser, located in the
fridge door, is for storing drinking
water. With this appliance you can
obtain chilled water easily without
opening the refrigerator. You
review of following tips.
Dispenser Pad
water storage box cover
water storage box
dispenser part

Before using

Before using this appliance for the first
time, you should use it based on
following instructions:
1. Hold the two sides of the water tank
tightly, then pull up the water tank by
shaking up and down.
2. Unscrew the head, then clean it and
the inside of water tank.
①
②
dispenser part
Assembling
Before assembling, please drain the
water
whether the washer reversed or not.
1. Insert the head into the hole.
2. Fit the tank along the guides on
the door.
3. Press down two side of the tank.
4. When you hear a click sound, that
should
means the installation is completed.
①
Guide
③
1. Be careful not to press on the head;
2. when fitting the water tank, ensure
the head inserted into the hole first.

Filling water

1. Open the water supply inlet cover
from the right side.
2.Fill the water.
Caution!
Fill with water up to 3L (which is
●
suggested), and not above the
level. Otherwise, it may overflow
even when the cap cover is close.
inside the tank, and check
②
Slot
④
water supply inlet cover
Middle rack