Troubleshooting - GMC GMCGT550 Handbuch

Troubleshooting

Problem
No function when On/Off Trigger (8) is operated
Bad quality cut
Slow rotation speed
579129_Z1MANPRO1.indd 11
Possible cause
No live mains connection
Defective On/Off Trigger Switch
Grass is too high or too thick for the trimmer motor
Vegetation is wrapped around the cutting head
Tool is overheating
Carbon brushes are worn
11
Solution
Check mains connection and switch on power
Replace the On/Off Switch at an authorised GMC service
centre
Work more slowly and if necessary use a different tool
Switch off the trimmer and clear vegetation from the cutting
head area
Switch off the tool and let it cool down to room temperature.
Inspect and clean the ventilation slots
Have carbon brushes replaced at an authorised GMC
service centre
GB
03/02/2016 09:15