Receiving A Call - SSANGYONG Audio S009 Benutzerhandbuch

Bluetooth
Connecting a mobile phone
• Devices are registered once paired and connected with this unit.
You can select the registered device and connect it.
• If pairing has already been archived, start operating from here.
• Depending on the device, connection may start automatically after
pairing.
1. Connect to this unit using your mobile phone
or press Media/BT button 1.5 second or
longer to show BT setting where you can
select the desired device.

Receiving a call

When receiving a call, the ring tone is output from your car speakers
and caller's ID appears on screen.
1. When a call comes in, "Incoming Call" and
"Caller's ID" appears with a ring tone, select
"Accept" then press ENTER button.
"Calling" with Call ID appears and the phone
call starts. The built-in microphone of this audio
system will pick up your voice.
To receive the call on the mobile, select Secret
and press ENTER.To reject an incoming call,
rotate TUNE and select "Reject" and press
ENTER button. "CALL END" appears and
returns to previous function.
18
Audio S014
Ending a call
1. Rotate TUNE and select "END" and press
ENTER button.
"CALL END" appears and returns to
previous function.
Adjust the talk volume
1. Rotate VOLUME dial to increase or to
decrease the talk volume level.
The display will show the Bluetooth
volume level. (BT VOL : 06 ~ 45)
Muting the talk sound
1. Rotate TUNE and select "MIC OFF" to
active the microphone mute function.
Soft button of "MIC OFF" will change to "MIC
ON".
To cancel the microphone mute function,
select and press ENTER button.