Bluetooth; Bluetooth Operation - SSANGYONG Audio S009 Benutzerhandbuch

06

Bluetooth

Bluetooth operation

To use the Bluetooth function, the following procedure is necessary
1. Pairing
When connecting Bluetooth devices for the first time,
mutual registration is required. This is called "pairing". This
registration(pairing) is required only for the first time, as this unit
and the other devices will recognize each other automatically the
next time. (Depending on the device, you may need to input a pass
code for each connection.)
2. Connecting
Sometimes pairing allows automatics connection.
To use the device after pairing is made, start the connection.
3. Hands-free talk/Music streaming
You can call a mobile phone and listen to music when the
connection is made.
• Some Bluetooth device may no support specific functions.
Pairing your phone and car audio system
First, register("pair") a Bluetooth device (mobile phone, etc.) and
this unit with each other. You can pair up to five devices. Once
pairing is established, there is no need to pair again.
Place the Bluetooth device with 3m(9ft) of this unit.
1. Press and hold Media/BT button for
more than 1.5 seconds. The unit
enters pairing standby mode.The unit
information, pass key and standby
time will appears on the display.
2. Set the Bluetooth device to search for this unit. A list of detected
devices appears in the display of the connecting device. This unit
is displayed as "TIVOLI" on the connecting device. Confirm this by
press "YES", "OK" or "Pairing" on your mobile device.
3. If *Pass key input is required, input the "1234"(4 digit) number
which is displayed on the unit.
If the pairing is successes the "Pair success" will be displayed then
the Paired device name will be showed. Pairing is required only
once for one device. Multiple device can be paired and only one
device can be connected for use.
If the mobile device support SSP(Simple Secure Pairing) profile
then the system will automatically accept the pairing authentication
once the mobile device confirm the SSP pairing.
4. Set the Bluetooth device to connect to this unit.
17
Audio S014