Operating Parameters; Wiring And Electrical Connection - G-U GU-SECURY Automatic mit A-Öffner Bedienungsanleitung

Assembly and Operating Instructions
GU-SECURY Automatic with A-opener
Technical Data Sheet
3

Operating parameters

3.1
Supply voltage
Rated current
IP protection class
Endurance test
Cable cross section
Preload unlocking

3.2 Wiring and electrical connection

The cables must be laid in such a way that they cannot be squeezed in or damaged in the area
of the lock for end during installation.
Distribution boxes must be accessible for maintenance work. Cable types, lengths, and cross
Attention:
Observe standards and regulations for extra-low voltage (SELV)
during installation and laying of cables.
Flexible cables must not be covered with plaster, free-hanging cables
must be relieved from strain.
For a cable duct, or rather instead of such, we recommend the use of SECUREconnect from
the GU-BKS product range.
16
12 V AC
12-24 V DC (stabilised)
1 A
40
200,000 opening cycles in accordance with
DIN 18251 part 3
see table „Cable cross section" on page 17
up to 280 N with 12 V AC or DC
up to 400 N with 24 V DC