Sony VPL-FH300L Kurzreferenz Seite 30

4
Release the three silver plus screws 1 of
lamp 1 or lamp 2 with a Phillips
screwdriver, hold the drawing knob 2
between the fingers, and then draw out the
lamp.
12
GB
Replacing the Lamp (s)
5
Lamp 2
Lamp 1
6
Caution
Do not put your hands into the lamp replacement
slot, and do not allow any liquid or other objects
into the slot to avoid electrical shock or fire.
Insert the new lamp a all the way in until
it is securely in place. Tighten the three
screws b of Lamp 1 and Lamp 2.
Notes
• Be careful not to touch the glass surface
of the lamp.
• The power will not turn on if the lamp is
not secured properly.
Restore the lamp cover to the original
position and tighten the four screws with
the phillips screwdriver.
Note
Be sure to attach the lamp cover securely as it
was. If not, the projector cannot be turned on.
Lamp 2
Lamp 1