Installing The Fronius Modbus Card - Fronius Modbus Card Bedienungsanleitung

Installing the Fronius Modbus Card

Installing the
Fronius Modbus
Card
1
2
WARNING! Danger of personal injury or damage to equipment from electric
shock or spark-over. A Fronius Modbus Card and a Fronius Com Card must never
be operated simultaneously in one device.
If a Fronius Com Card is installed in the inverter:
Remove the Fronius Com Card from the inverter before installing the Fronius Modbus
Card
WARNING! Danger of personal injury or damage to equipment from electric
shock or spark-over.
Insert the Fronius Modbus Card into the appropriate part of the inverter as follows:
- if a Fronius Arc Detector Card, or an NL-MON PC board, is already installed,
insert the Fronius Modbus Card in the middle slot
- with the Fronius IG inverter, insert the Fronius Modbus Card in the far left-
hand slot labeled ENS
- in all other cases, insert the Fronius Modbus Card in the far right-hand slot
Insert and secure the Fronius Modbus Card in the inverter as per the "Inserting Option
Cards" section in the inverter operating instructions.
NOTE! When laying a cable, make sure that the cable does not touch any elec-
tronic components or edges. Do not kink the cable.
37