Configuring The Device; Configuring The Interfaces; Configuring The Bluetooth Adapter; Searching For The Bluetooth Adapter - Hella Gutmann mega macs 56 Schnellstartanleitung

mega macs 56

6 Configuring the Device

Configure all interfaces and functions under >Settings< in the main menu.
EN
6.1

Configuring the Interfaces

Here you can configure the interfaces for the printer, BPC-Tool, Bluetooth and WLAN.
Configure all interfaces of the device under Settings > Interfaces.
If there are several possible connections to devices or tools, the fastest and most stable connection is always
preferred.
The hierarchy for connection is as follows:
1. USB
2. Bluetooth
3. WLAN

6.1.1 Configuring the Bluetooth Adapter

Here you can configure the Bluetooth adapter.
The integrated Bluetooth module enables a wireless connection to a PC on which the driver package Hella Gutmann
Drivers is installed.
6.1.1.1

Searching for the Bluetooth Adapter

Proceed as follows to search for the Bluetooth adapter:
1. Insert the Bluetooth adapter into the USB port on the PC.
2. Select Interfaces under > Settings in the main menu.
3. Select the >Bluetooth< tab.
4. Activate the check box to take settings.
A confirmation prompt appears if WLAN was previously activated in the device.
5. Observe the confirmation prompt.
6. Confirm the confirmation prompt with
7. Do this via
8. Observe the information window.
38
NOTE
If the device has already been delivered with a Bluetooth adapter then both devices are already
assigned to each other ex works.
.
Search for Bluetooth adapter.
Configuring the Device
Configuring the Interfaces