Putting Into Operation; Charging The Battery; Switching On The Device; License Release - Hella Gutmann mega macs 56 Schnellstartanleitung

mega macs 56

5 Putting Into Operation

This section gives a description of how to switch the device on and off as well as all the necessary steps for the first
EN
use of the device.
5.1

Charging the Battery

Prior to putting the device into operation, charge the battery for at least 8 to 10 h while the device is switched off.
Proceed as follows to charge the battery:
1. Insert the voltage supply plug into the device's socket.
2. Insert the power plug into the plug socket.
The battery is charged.
5.2

Switching On the Device

To switch on the device:
1. Briefly push the ON/OFF button.
The general terms and conditions appear.
2. Read the general terms and conditions and confirm them at the end of the text.
The user selection window is displayed. The respective user name is saved for all data stored in the Car History.
This enables quicker identification of the mechanic who performed the repair work if a query is subsequently
made.
3. Double-click
4. Enter the user name.
5. Confirm your entry with
6. Activate the Stay logged in check box if necessary.
If the Stay logged in check box is activated, you will not need to select a user name when switching on in the
future.
7. Confirm your entry with
The input is saved automatically. The main menu appears.
Now you can start working with the device.
5.3

License Release

Proceed as follows to connect the device with the HGS server:
1. Select Contracts under > Settings in the main menu.
36
NOTE
When starting the device for the first time and after every software update, you need to confirm
the general terms and conditions (GTC) of the Hella Gutmann Solutions GmbH. Otherwise, certain
device functions will be unavailable.
If mega macs 56 recovery ("Rescue App") is displayed when switching on the device, contact the
responsible support staff or the Hella Gutmann Technical Help Line.
.
.
.
NOTE
In order to use the full scope of the purchased licenses you need to connect the device to the HGS
server prior to the first start-up.
Putting Into Operation
Charging the Battery