C-Pen ExamReader Anleitung Seite 6

nibs in the front end. Scanning start and stop points
are aligned with the edge of the transparent
window.
When the Scan Trigger gets in touch with the paper,
the scan light lits up. Start moving the pen straight
along the text line at a steady pace, avoid stops, do
not rotate the pen, and keep the text line in between
the nibs.
Le�/Right hand se�ng *must* be correct, but it is
possible to scan both from le� to right and from
right to le� at any �me. Give it a try...
Scan this line from le� to right.
Scan this line from right to le�.
For more details check the online guide.
T��� R����� ��������
There are quite a few se�ngs and op�ons in Text
Reader mode. To access these, press MENU bu�on
when in Text Reader mode.
C���� ������ - use to erase all content you have
scanned. Press OK bu�on to clear screen.
A����� ���� - controls whether a new text line
appends or replaces the previous one. Replace is a
6