Product Description - Concept VT6910 Handbuch

EN
• The unit is not designed for outdoor use.
• The unit is suitable for domestic use only. It is not designed for commercial operation.
• Do not touch the unit with wet or damp hands.
• Do not immerse the power cord, plug, or unit in water or any other liquid.
• Do not repair the appliance yourself. Contact an authorized service center.
Failure to follow the manufacturer's instructions may cause refusal of warranty repair.

PRODUCT DESCRIPTION

1. Air outlet grille
2. Mode selector
3. Power cord
NOTE
When turning the unit on for the first time or after a prolonged downtime the unit may release a slight smell. This
smell will vanish after short time.
Note: Do not use the unit in rooms smaller than 4 m
OPERATING INSTRUCTIONS
1. Place the unit on a stable surface or floor to avoid tipping over.
2. Connect the plug of the power cord to the wall outlet.
3. Select the required function using the mode selector:
= OFF
= Cold air
I = 50% heating capacity (1,000 W)
II = Full heating capacity (approximately 2,000 W)
4. After use, move the mode selector to the "
mains.
VT6910
2
1
2 .
O
" position and unplug the unit from the
3
17