Vga Settings; Cleaning The Unit - Clatronic CTV 699 LCD DVB-T Bedienungsanleitung

Contrast
Press the MODE button twice to adjust the contrast. With
the +/- buttons (left of the MODE button) you can carry
out the adjustment.
Colour
Press the MODE button three times to adjust the colour.
With the +/- buttons (left of the MODE button) you can
carry out the adjustment.
Tint (only in the NTSC System)
Press the MODE button four times to adjust the tint. With
the +/- buttons (left of the MODE button) you can carry
out the adjustment.
Note:
You can only carry out this adjustment if the TV standard
NTSC has been set in the system menu.
Note:
The menu language for these adjustments is English and
cannot be changed.
40
05-CTV 699 LCD_GB 40

10. VGA Settings

In VGA mode press the MENU button to call up the VGA
menu. Use the buttons CH+ or
dividual menu items. With the buttons
you can change the settings.
Note:
First go with the cursor to the symbol in the right-hand
bottom corner in order to select your national language.

11. Cleaning the unit

• Be sure to turn the unit off and disconnect the AC
power cord before maintaining the unit.
• Wipe the unit with a dry soft cloth.
If the surfaces are extremely dirty, wipe clean with a
cloth which has been dipped in a weak soap-and-wa-
ter solution and wrung out thoroughly, then wipe with
a dry cloth.
• Never use alcohol, benzine, thinner, cleaning fl uid
or other chemicals. Do NOT use compressed air to
remove dust.
CH- to select the in-
VOL- or VOL+
02.09.2005, 11:50:38 Uhr