Receiving And Changing Channels - Clatronic CTV 699 LCD DVB-T Bedienungsanleitung

Setting the Language:
Move the cursor in the system setting menu with the
buttons CH+ or CH- to the submenu „Language".
Press the OK button to call up the language menu.
Move the cursor with the buttons
the item „OSD Language". Select the menu language
with the buttons VOL- or
Move the cursor with the buttons
the item „1st Audio Language". Select the language
with the buttons VOL- or
Move the cursor with the buttons
the item „2nd Audio Language". Select the language
with the buttons VOL- or
Move the cursor with the buttons
the item „Subtitle Language". Select the language
with the buttons VOL- or
Confi rm by pressing the OK button. The system
returns to the system setting menu.
Setting the Time:
Move the cursor in the system setting menu with the
buttons CH+ or CH- to the submenu Time Set-
ting". Press the OK button to call up the time setting
menu.
Move the cursor with the buttons
the item „GMT usage". Select ON or OFF with the
buttons VOL- or VOL+.
ON: automatic time/date setting.
OFF: manual time/date setting.
In order to return to the normal TV channel press the
EXIT button three times.
Note:
If you have selected OFF the words "Set the Date"
and "Set the Time" appear automatically.
05-CTV 699 LCD_GB 33

7.3 Receiving and Changing Channels

CH+ or CH- to
VOL+.
CH+ or CH- to
VOL+.
CH+ or CH- to
VOL+.
CH+ or CH- to
VOL+ .
CH+ or CH- to
Move the cursor with the buttons
the item „Set the Date". Now enter the correct date
(year/month/day) with the number buttons on the
remote control.
Move the cursor with the buttons
the item „Set the Time". Now enter the correct time
(hours/minutes) with the number buttons on the remo-
te control.
Then press the EXIT button three times to return to
the normal TV channel.
In addition to changing the channels with the buttons
CH+ or CH-, a television channel can also be
selected in the following ways:
Channel Preview
Call up a channel preview with the OK button. Move
the cursor with the buttons
desired channel (the currently selected channel is
shown on the right-hand side of the screen). Press
the OK button to select the channel.
Entering the Channel Number
on the Remote Control
You can enter the channel number using the remote
control in order to switch on the desired television
channel.
Enter the desired channel number with the help of the
number buttons on the remote control, e.g. 10, and
then press the OK button.
CH+ or CH- to
CH+ or CH- to
CH+ or CH- to the
33
02.09.2005, 14:03:45 Uhr