Connecting The External Antenna; Connecting Earphones; Connecting The Av Input; Connecting The Av Output - Clatronic CTV 699 LCD DVB-T Bedienungsanleitung

5.3 Connecting the External Antenna

Connect the end of the antenna cable supplied to the
antenna socket on the television set.

5.4 Connecting Earphones

Connect the earphone plug to the earphone socket on
the television set.
Note:
When the earphones are inserted the sound can only
be heard through the earphones. No sound comes
out of the loudspeakers of the television set.

5.5 Connecting the AV Input

Connect the external video cable to the yellow socket
on the AV adapter cable and the audio cable to the
red or white audio socket. Then insert the AV plug into
the AV/IN socket on the television set.
Note:
The external video/audio cable is not supplied.

5.6 Connecting the AV Output

Connect the external video cable to the yellow video
socket on the AV adapter. Then connect the external
left-hand audio cable to the white audio socket and
the external right-hand audio cable to the red audio
socket on the AV adapter.
05-CTV 699 LCD_GB 29
External
antenna
socket
Note:
The external video/audio cable is not supplied.

5.7 Connecting the VGA Input

Connect the VGA cable to the VGA socket of your
PC and tighten the screws in order to ensure a good
connection. Then connect the other end of the cable
to the VGA socket of the television set and tighten
these screws too.
Basic Operation of the Television Set
1. Connect the set to the power supply and turn the
mains switch on the left-hand side of the set to ON.
2. Press the ON/OFF button on the set.
3. Pull out the telescopic antenna
4. Select the desired channel with the channel selection
buttons
5. Adjust the volume of the television signal with the
VOL + /
MENU
Note
Switching between ON/OFF/VGA/AV/TV: Briefl y press
this button to switch between VGA/AV/TV or switch
the set on. Keep the button pressed down for approxi-
mately 3 seconds to turn the television set off.
CH+ / CH-.
VOL - buttons.
VOL- VOL+ CH+
Confi rm
Volume Volume Station selection
with OK
CH-
Station selection
IR remote control
02.09.2005, 11:50:02 Uhr
DVB/VAG/AV
ON/OFF
Keep the buttons
pressed down for approx.
3 seconds to switch
the set off.
Electric current display
Standby: red
Operation: green
29