Setting The Speaker Setup - Sherwood Rd-6505 Bedienungsanleitung

RD-6505(G)_100311_RD-5503(g) 2010-05-03 오후 6:44 페이지 34

SETTING THE SPEAKER SETUP

• After you have installed this receiver and connected all the components, you should adjust the speaker settings for the
optimum sound acoustics according to your environment and speaker layout.
• Even when you change speakers, speaker positions, or the layout of your listening environment, you should adjust the
speaker settings, too.
• CONFIG (CONFIGURATION) : To select the sizes of the speakers that are connected.
• DISTANCE: To enter the distance between the listening position and each speaker to set the delay time automatically
for optimum surround playback.
• X-OVER (CROSSOVER) : To select the desired crossover frequency.
• RETURN : To return to the previous menu.
When selecting the CONFIGURATION
1.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the "CONFIG", then press the ENTER
button.
2.
Press the CURSOR UP(▲)/DOWN(▼) buttons
to select the desired speaker.
34