Audio Settings - Pioneer MVH-S420DAB Bedienungsanleitung

Menu Item
SEL DEVICE
iPhone
PLAY
STOP
*1 Only available in areas where [SOFT LINK] function is supported.
*2 Not available when [S.FOLLOW] function is turned off.

AUDIO settings

NOTE
[CHK APP SETTG.] may be displayed when the setting is performed from Pioneer Smart Sync.
Menu Item
EQ SETTING
[SUPER BASS], [POWERFUL],
[DYNAMIC], [NATURAL], [VOCAL],
[VIVID], [SET BY APP]*,
[CUSTOM1], [CUSTOM2], [FLAT]
* [SET BY APP] is displayed when
the preset equalizer curve that is
not available in the unit has been
set from Pioneer Smart Sync.
Select an equalizer band and
level for further customising.
Equalizer band: [50HZ] to
[12.5kHZ]
Equalizer level: [–6] to [+6]
FADER*1
BALANCE
SUBWOOFER*2
[ON], [OFF]
Description
Connect a Bluetooth device in the list.
Start playback.
Stop playback.
Description
Select or customise the equalizer curve.
• When you select a setting other than
[CUSTOM1], [CUSTOM2] and [SET BY APP], you
can also customise the equalizer curve by
pressing and holding the M.C. dial, then store
the customised equalizer curve in [CUSTOM1].
Adjust the front and rear speaker balance.
Adjust the left and right speaker balance.
Set to [ON] when using a subwoofer speaker.
- 24 -