Mounting Precautions; Mounting Precautions (For Sharp Dealers And Service Engineers) - Sharp PN-V602A Installationsanleitung

• This product is for use indoors.
• A mounting bracket compliant with VESA specifications is
required.
• Since the monitor is heavy, consult your dealer before
installing, removing or moving the monitor.
• Mounting the monitor on the wall requires special expertise
and the work must be performed by an authorized SHARP
dealer. You should never attempt to perform any of this
work yourself. Our company will bear no responsibility
for accidents or injuries caused by improper mounting or
mishandling.
• Use the monitor perpendicular to a level surface. If
necessary, the monitor may be tilted up to 20 degrees
upward or downward.
• When mounting the monitor horizontally, the optional fan
cover (PN-ZR31) is required. For details along with the
horizontal mounting conditions, consult your dealer.
• This monitor should be used at an ambient temperature
between 32°F (0°C) and 104°F (40°C).
• Be careful of high temperatures in the surrounding area.
When installing the monitor inside a housing, or if the
ambient temperature may be outside of the range of 32ºF
(0ºC) to 104ºF (40ºC), install a fan or take other measures
to keep the ambient temperature within the required range.
• Temperature condition may change when using the monitor
together with the optional equipments recommended by
SHARP. In such cases, please check the temperature
condition specified by the optional equipments.
• Do not block any ventilation openings. If the temperature
inside the monitor rises, this could lead to a malfunction.
• Do not place the monitor on a device which generates heat.
• Adhere to the following when installing the monitor in its
portrait orientation. Failing to adhere to the following may
cause malfunctions.
- T o install in landscape orientation, rotate the monitor 90
degrees to the right.
- Set the MONITOR on the SETUP menu to PORTRAIT.
(See Operation manual.)

Mounting Precautions (For SHARP dealers and service engineers)

• When installing, removing or moving the monitor, ensure that this is carried out by at least 2 people.
• Be sure to use a wall-mount bracket designed or designated for mounting the monitor.
• This monitor is designed to be installed on a concrete wall or pillar. Reinforced work might be necessary for some
materials such as plaster / thin plastic board / wood before starting installation.
This monitor and bracket must be installed on a wall which can endure at least 4 times or more the weight of the monitor.
Install by the most suitable method for the material and the structure.
• To attach a VESA-compliant mounting bracket, use M6 screws that
are 5/16 inch (8 mm) to 3/8 inch (10 mm) longer than the thickness
of the mounting bracket.
• When moving the monitor, be sure to hold it with either handles or
the corners on the bottom of the unit. Do not hold the LCD panel.
This may cause product damage, failure, or injury.
• When performing an installation where the monitor is stacked,
please install it such that load is not placed on the monitor frame.
• After mounting, please carefully ensure the monitor is secure, and
not able to come loose from the wall or mount.
• Do not use any screw holes other than VESA holes for installation.
4
E

MOUNTING PRECAUTIONS

- B e sure to secure the power cord (supplied) to the cable
clamp attachment with the supplied cable clamp.
Make sure that the power cord (supplied) does not supply
power to the terminal when being secured and do not
over bend the power cord (supplied).
• After installing the monitor, affix the protection covers
(4 pieces) as necessary.
Protection cover
Protection cover
• A video wall should be only be composed of identical models.
Do not use this monitor as part of a video wall that includes
another model.
5/16 - 3/8 inch (8-10 mm)
Power cord (Supplied)
Cable clamp
Cable clamp
attachment
Screws (M6)
Mounting bracket
Monitor mounting