Palazzetti DIANA S Allgemeine Angaben-Hinweise-Installation-Wartung Seite 30

-
+
14.6 ADJUSTING THE DRAUGHT
The stove is provided with a draught adjustment valve for
the fume exhaust duct (FIG. 6.4B).
The draught should be adjusted by the installer at stove
commissioning.
If the fume exhaust duct draught is optimal, leave the
valve open, if the draught is excessive close it making
sure that there are no smoke puffs in the environment if
the door is opened.
B
The declared nominal yield of the chimney is obtained
by burning the right quantity of wood, making sure not
to overload the combustion chamber. The ideal length of
the wood is provided by the length of the log holder.
The minimum width of the air passage must be 5 mm
(Pos. R) Fig. 6.5
fig. 6.4
+
A
-
30
00 477 7140 - 08/2018 - PALAZZETTI - PN - Italy