Hints And Tips - AEG IKE85473FB Benutzerhandbuch

18 www.aeg.com
.
• Heat setting display for the left front
control bar shows the heat setting. To
change the heat setting use left
front control bar.
• When you activate the function for the
first time you will get heat setting
for the front position,
middle position and
position.

7. HINTS AND TIPS

WARNING!
Refer to Safety chapters.
7.1 Cookware
For induction cooking zones
a strong electro-magnetic
field creates the heat in the
cookware very quickly.
Use the induction cooking
zones with suitable
cookware.
Cookware material
• correct: cast iron, steel, enamelled
steel, stainless steel, multi-layer
Activating the function
To activate the function place the
cookware in the correct position on the
cooking area. Touch
above the symbol comes on. If you do
not place the cookware on the cooking
area
the flexible induction cooking area is set
to
Deactivating the function
To deactivate the function touch
for the
set the heat setting to
for the rear
above the symbol
• not correct: aluminium, copper,
Cookware is suitable for an induction
hob if:
• water boils very quickly on a zone set
• a magnet pulls on to the bottom of
Cookware dimensions
You can change the heat settings for
each position separately. The hob will
remember your heat settings next
time you activate the function.
comes on and after 2 minutes
.
goes off.
bottom (with a correct marking from a
manufacturer).
brass, glass, ceramic, porcelain.
to the highest heat setting.
the cookware.
The bottom of the cookware
must be as thick and flat as
possible.
Ensure pan bases are clean
and dry before placing on
the hob surface.
. The indicator
or
. The indicator