Zhermack QUASAR serie Handbuch Für Gebrauch Und Wartung Seite 129

MAINTENANCE AND USE MANUAL
the user must provide a power connection with relative socket near the machine installation point.
the user must also install an adequate electrical circuit breaker upstream from the socket as well as
efficacious overload/indirect contact safety devices.
Connection is effected via the safety plug (16a, in compliance with European standards) at the end of
the power lead: this must be inserted in the mains socket.
When connecting check:
• that mains voltage and frequency are as indicated on the identification plate (incorrect power
supply voltage may damage the machine);
• that the mains supply has a proper, efficient earth connection.
It is forbidden to tamper with the power lead and its plug. When replacing them owing
to damage and/or wear please contact an Authorised Service Centre.
A proper earth connection is compulsory. Should it temporarily be necessary
to use an extension lead the latter must comply with the standards in force in
the country of use.
QUASAR/QUASAR PLUS
EN
The machine has been designed for use on a
Suitable worktops include service furniture
modelling tables (where work is done sitting
down). all worktops must be checked for
CONNECTING UP TO THE POWER SUPPLY
Worktops
rigid worktop parallel to the floor.
(where the operator is standing) or
129 of 296
6.3.1
stability.
6.4