VWR VAPOUR-Line lite serie Bedienungsanleitung Seite 12

Once the delay has been set, after pressing the START button, the display will show the delay and the
remaining time before the cycle begins. The delay is stored in the memory, set 00:00 as delay to reset the
delay. The maximum settable delay is 23:59
Sub menu "Print last cycle"
▲
▼
From this menu it is possible to print the last completed cycle by pressing the ENTER button.
Sub menu "Password"
▲
▼
From this menu it is possible to set a password to prevent unauthorised modification of the sterilisation and
instrument settings. The password can be set by pressing the ENTER button from "PASSWORD".
From the main menu the password will be requested every time the ENTER or MENU buttons are pressed. A
password will not be requested if the password value has been set to 0000 (default value).
P R I N T
C Y C L E
P A S S W O R D
12
L A S T