Sterilisation Cycle - VWR VAPOUR-Line lite serie Bedienungsanleitung

Sub menu "Date and time"
▲
▼
From this menu it is possible to adjust the date and time. Press the ENTER button from the "DATE AND TIME"
menu.
Sub menu "LCD contrast"
▲
▼
From this menu it is possible to adjust the display contrast. Press the ENTER button from the menu "LCD
CONTRAST".
The contrast default value is set to 55%.
Sub menu "Service"
▲
▼
This menu is for maintenance authorised personnel only. The parameters stored in this menu can only be
displayed but not modified.

Sterilisation cycle

1. To start a cycle, select the desired sterilisation programme
2. Press the START button
3. The display will show on the upper row the selected cycle (temperature and time), while on the lower row
will show the actual vessel temperature and the remaining sterilisation time
P
4. Once the sterilisation temperature has been reached, the sterilisation time count will begin. At the end of the
D A T E A N D
L C D C O N T R A S
5 5
S E R V I C E
1 1 2 1 C
1 0 3 . 4
13
T I M E
T
[ % ]
- 1 0 m
C - 1 0 m