Fracarro 3DGFLEX Bedienungsanleitung Seite 27

From the green option bar on the top, select "Configuration" "Monitoring" "Historical" to
enter the following window
From this window, you can display and search the history of events detected by monitoring.
The page reports the event ID, the relevant module, the date, the time, the value, if an alarm
was generated or not, and the description of the event.
The Historical can also be exported in Excel or PDF formats or it can be printed directly.
The following operations of "Save configuration" and "Upload configuration" can be applied to
all modules simultaneously if the access to their menus is from the Home Page Operations.
If the access to these functions is performed from each module (i.e. for the control unit), these
operations can be performed only for that specific module.
From the green bar of options at the top, se-
lect "operations" "save configuration" "to
file/"to USB" and you will enter the window
shown besides.
From this window, you can choose the module
of which you want to save the configuration in
PC file or in the USB.
From the green bar of options on the top, select "operations"  "upload configuration" 
"from file/"from USB" and you will enter the following window:
27