Omron Gentle Temp 720 Bedienungsanleitung Seite 14

4. Troubleshooting and Maintenance
Error Display
• Forehead measurement mode: The temperature
• Surface measurement mode: The temperature
• Forehead measurement mode: The temperature
• Surface measurement mode: The temperature
Device cannot be powered on to ready stage.
12
Cause
taken is higher than +42.2°C (108°F).
taken is higher than +80°C (176°F).
taken is lower than +34°C (93.2°F).
taken is lower than -22°C (-7.6°F).
Remedy
Use the unit within its measurable range. If a
malfunction still exists, please contact an OMRON
retailer.
Use the unit within its measurable range. If a
malfunction still exists, please contact an OMRON
retailer.
Change to a new battery.
(Refer to section 4.4)