Only when the tuner is selected as the in-
put source
4
Use the 4 and ¢ keys to select a preset
radio station, and press the enter/demo key.
Main unit
Remote control unit
To check or modify the reservation contents, restart the timer reservation from the beginning.
8
Put the unit in standby mode.
To cancel the program timer
Perform steps 1 ~ 3 selecting "OFF" in step 3.
\
\
÷ When the timer setting is completed by pressing the
enter/demo key, "COMPLETE" is displayed.
÷ When the unit enters the timer standby mode, the on/
standby (timer) indicator lights in green.
÷ If there is a power failure or the power cord is un-
plugged after the timer reservation has been activated,
the on/standby (timer) indicator blinks in green. In this
case, the clock setting should be restarted from the be-
ginning.
÷ To check whether the program timer is ON or OFF,
check whether
power is on. If lit, that timer is ON.
Timer operation
and
are lit while
37
EN