Circuit Diagram - Bosch SL 2450 C Fehlersuch– Und Reparaturanleitung

9 Final completion work
1) Disconnect the mains plug
2) Check that all parts of the unit are correctly and firmly
connected.
3) Visually inspect the charger for correct installation of
the components.
4) Slide the orange-colored housing section on from
below and swivel it up against the plastic cover.
5) Screw the housing together (a total of 6 screws).
A high-voltage and PE wire test in
accordance with VDE 0700 / IEC 335-1 must
be conducted after repair.
A function test must be conducted after
repair.
SL 2450 C
English

10 Circuit diagram

Legend
S1 ... S6 Selector switch
R20 Series resistor
F2 Electric cutout, charging stage 2 (2A)
F1 Secondary fuse (only on 7 780 100 008)
17