Working In Fi Le Mode - AEG DVD 4530 Bedienungsanleitung

English
46
Adjusting the volume
Creating a playlist (DVD)
Deleting a playlist (DVD)
Using CD/DVD
05-DVD 4530_GB.indd 46 05-DVD 4530_GB.indd 46
Press the VOL + button (Fig. 3/
Press the VOL - button (Fig. 3/
NOTE:
Please remember, that this will only change the output volume of the
DVD-Player. In order to adjust the volume to your requirements you
may also have to change the volume of the playback device.
When you press the R/L button (Fig 1/7) on the front panel, for the frist
time, it turns to L-Mono. Press for the second, it turns to R-Mono. Press
the button again, it return to stereo.
It is possible that you may not wish to play the titles in the same order
that they are to be found on the DVD. The function „Create Playlist" you
can create your own playing order.
To do this, proceed as follows:
1. Press the PROG button (Fig. 3/
enter the desired order of the chapters/titles.
NOTE:
However, your playlist will be lost when switching off the DVD-
Players or when inserting a new DVD.
2. Use the Cursor Buttons (Fig. 3/
3. Enter the desired title and chapter at the relevant position in the
table. Use the Numerical Buttons (Fig. 3/
4. Use the Cursor Buttons (Fig. 3/
the bottom of the screen to save the input.
5. Press the ENTER button (Fig. 3/10) on the remote control to confi rm
this command.
1. Press the PROG button. You will now see a table.
2. Use the Cursor Buttons (Fig. 3/
"Stopp" at the bottom of the table.
3. Press the ENTER button (Fig. 3/10) on the remote control to confi rm
this command.
4. Press the PROG button to terminate this procedure.

Working in fi le mode

As well as being able to play back „normal" fi lms or music from CDs/DVDs,
this DVD player is also able to play back video or audio fi les from CDs
or DVDs which are stored in the fi le system. Such media are frequently
available if you create CDs of digital photographs or MP3 music on your
computer.
1. Place the CD or DVD on the tray ➯ Page 43, „Loading a CD/DVD".
2. Select the desired fi le(s) and start the replay ➯ Page 47, „Selecting
fi le/directory and starting replay".
2
) to increase the volume.
2
) to reduce the volume.
21
). A table is displayed. Here you can
25
) to navigate in the table.
31
) for this purpose.
25
) to select the command "Start" at
25
) to manoeuvre to the command
19.02.2008 16:06:16 Uhr 19.02.2008 16:06:16 Uhr