Scotsman Vari-Smart Anweisungen Seite 5

13. Locate sensor and wire from kit. Peel
adhesive cover from sensor mount.
14. Position sensor in a hole in the base of
machine. Press into place. Be sure sensor mount
fits tight against the sheet metal.
15. Open control box door. Route connecting wire
through control box snap bushings to controller.
Note: Route connecting wire away from items like
the fan blade, discharge tubing and crankcase
heater.
16. Connect sensor wire to Vari-Smart board,
terminal J2.
17. Close control box door. Secure with original
screw.
18. Switch power on.
19. Rotate adjustment knob to the desired
position. See the next page.
20. Reconnect power.
21. Push and release the On button to restart ice
making.
22. Return all panels and covers to their original
positions. Secure them with the original screws.
3
Adhesive
Cover
Step 13
Step 14
Step 15