Scotsman Vari-Smart Anweisungen Seite 3

Installation and Use of the Vari-Smart Control (KVS)
Scotsman's Vari-Smart Ice Level Control is an optional add on electronic device that can
be applied to most Prodigy models. It can be used:
• With the standard controller
• With the standard controller and the Smart-Board (KSBU) and (KSBU-N)
Kit Contents:
• Control board w/knob
• Sensor, sensor housing, and cable
• Label
• 2 Screws
Vari-Smart installation:
1. Depress and hold the Off button until the machine
shuts Off (Status light will go out).
2. Disconnect electrical power from the ice machine.
3. Remove front panel.
4. Locate blank part of controller
label in the upper right corner of
the control box door. Score
perforations with knife, lift up top
corner of label and peel the blank
portion away from the control box
cover up to the perforations. Flex
several times and remove that
part of the label from the control
box cover.
5. Attach supplied label to control
box door in place of the section
removed in step 4.
6. Open control box door.
7. Remove knob from controller if
on board.
Instructions
1
KVS Kit
Remove and
replace the
corner of the
label.