Foam Plug In Sensor Location - Scotsman Vari-Smart Anweisungen

8. Insert pins of Vari-Smart control board into connector J4 (cuber) or J6 (nugget or
flaker) of controller.
9. Secure Vari-Smart board to control box door with the two provided screws.
10. Close control box door.
Vari-Smart Board
Installing Vari-Smart Board
11. Attach knob to shaft of the control.
12. Locate sensor mounting hole in base
of machine. The hole is located behind the
reservoir and has a foam plug in it. Remove
the plug. Wipe area around plug to remove
dust and dirt.

Foam Plug In Sensor Location

2