Lcd Display; Changing The Temperature Unit Between˚c &˚F - Sure Sense Anleitung

LCD display

The standard display for the reader is:
The animal's microchip number
Battery level indicator
Changing the temperature unit between
To change the temperature setting of the reader,
first remove the batteries. Then press and hold the
reader's button while re-inserting the batteries. The
temperature will now be displayed in Fahrenheit. To
revert to Celsius, repeat the process.
Microchip Temperature
(only for temperature-sensing microchips)
One of the icons below will replace the
temperature reading if it is out of range:
Below
33˚C (91.4˚F)
Displayed when the reader is searching for the pet's
microchip.
The scan will time out automatically if no chip is found
and the chip number will display as a series of X's. Pushing
the button again will activate another scan.
Displayed when the batteries are completely drained. To
insert new batteries see page 4.
Above
43˚C (109˚F)
C & F
˚ ˚
EN
6