Herunterladen Inhalt Inhalt Diese Seite drucken

How To Scan A Pet's Microchip - Sure Sense Anleitung

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

How to scan a pet's microchip

1
2
3
A microchip scan will time out after aproximately 15 seconds if the reader is unable to
!
detect a microchip. The LCD screen will display a series of X's (as shown on page 6)
and it will vibrate twice to let you know that your scan was unsuccessful.
Microchips are normally located on the left side of the neck or between the animal's shoulder
!
blades. Microchip placement may vary per animal.
5
Insert batteries as instructed on page 4. Press the button on
the reader (as indicated) to turn it on. It will automatically turn
off when not in use.
Press the button again, the reader scans for about 12 seconds
after you press the button and maintain contact with the
animal's body. Move the reader SLOWLY, following the
recommended scanning patterns shown below.
When the reader detects a microchip, the number will
appear on the LCD screen and it will vibrate once to let you
know that the reading has been successful. (It will also display
the Microchip Temperature if the animal has a temperature-
sensing microchip).
Scanning Pattern 1
Side to side slowly
across the animal's body
Scanning Pattern 2
Up and down slowly across
the animal's body

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis