Operation - auna 10028699 Bedienungsanleitung

• Press STANDBY / FUNC to switch the device on.
• Press and hold STANDBY/FUNC for 3 seconds to switch to standby.
Automatic Tuning
Press and hold the "SKIP +" or "SKIP -" button over 3 seconds to start the automatic tuning process. When
a station is tuned in the tuning process, it will stop automatically and you can listen to your desired station.
Manual Tuning
Press „SKIP +" or „SKIP -" each time not over 1 second or less. The frequency changes by a fixed 0.05 MHz
steps.
Manual Memory Preset
• Tune in your desired station.
• Press / MODE /
• The display shows (flashing): „P01".
• Chose the desired preset number with PRE-/ALARM 1 or PRE+/ALARM 2. There is a total of 30 presets
(P01 - P30) available.
• Press Sie / MODE /
Press „PRE - / ALARM 1" or „PRE + / ALARM 2" to choose your desired station.
Automatic Memory System (AMS)
• Press and hold
search for available stations within the whole frequency range and automatically save 30 presets. This
might take a moment.
Press „PRE - / ALARM 1" or „PRE + / ALARM 2" to choose your desired station.
14

Operation

Standby / On/Off
Radio Operation
to enter the preset setting.
, to save the current station to the chosen preset.
/ MODE / for 3 seconds to start the automatic memory preset. The device will