Rear Panel - Rohde & Schwarz Rtb2000 Erste Schritte

®
R&S RTB2000
PROBE COMP. (7)
Probe compensation terminal to support adjustment of passive probes to the
oscilloscope channel.
USB type A (8)
USB 2.0 type A interface to connect a mouse or a keyboard, or a USB flash drive
for storing and reloading instrument settings and measurement data, and to
update the firmware.
AUX OUT (9)
Multi-purpose BNC output that can function as pass/fail and trigger output, output
of 10 MHz reference frequency, and as waveform generator (with option
R&S RTB-B6).
3.2

Rear Panel

Figure 3-2 shows the rear panel of the R&S RTB2000 with its connectors.
Getting Started 1333.1605.02 ─ 02
Square wave signal for probe compensation.
Ground connector for probes.
Instrument Tour
Rear Panel
18