Technical Data; Main Components - rawlink 20447 Gebrauchsanweisung

BATTERY CHARGER 6/12 V - 2/4 A
Introduction
To get the most out of your new battery
charger, please read through these
instructions before use. We also recommend
that you save the instructions in case you
need to refer to them at a later date.

Technical data

Battery type: All 6 V and 12 V lead acid
Voltage/frequency:
Charge voltage and current:
Output:
IP class:
With 8-step fully automatic microprocessor
control
With protection against overheating,
overcharging, short circuit, reverse polarity
and low voltage
4 4
3 3
2 2
1 1
18
batteries of 4-120 Ah
230 V ~ 50 Hz
6/12 V - 2/4 A
max. 70 W
65
5 5
6 6

Main components

1. MODE button
2. Display
3. Battery charger
4. Cord for 230 V supply
5. Battery clamps
6. Cord for battery clamps
7 7 8 8
bm bm
bn bo
Display
7. Symbol for slow 12 V charging
8. Symbol for rapid 12 V charging
9. Symbol for 12 V charging at low
temperature
10. Symbol for 6 V charging
11. Symbol for defective battery
12. Symbol for warning, short circuit or
reversed polarity
13. Current battery voltage
14. Symbol for charging status. Each bar in
the battery represents 25%
9 9 bl
bp bp