Cleaning And Maintenance - Lanaform HEATING Blanket 2 pers Bedienungsanleitung

• Do not use the blanket with other heating devices or to warm other equipment (hot-water bottle, electric blanket, ...).
EN
• If you are worried about your health, consult a doctor before using this appliance.
• If you feel any pain while using this appliance, stop using it immediately and consult your doctor.
• Never use this appliance in contact with a part of the body that is swollen or inflamed or if you have any form of skin rash.
• The control must remain within reach. Do not leave the concealed switch under the blanket, pillow or other objects.
• Do not use the blanket when it is wet and do not switch it on in order to dry it.
• Do not position the blanket on top of you in any way. Only use as a blanket is permitted.
• Do not use this blanket with animals.
• When you store your blanket for long periods, store it in a place that is dry. Check its condition carefully before using it
again for the first time. If the power lead seems damaged, do not use the blanket.
• This blanket must not be used by young children or people that are insensitive to heat.
USE OF THE ELECTRIC BLANKET
2
1
• Position the blanket flat on the bed. The end of the blanket without the controls is positioned at the foot of the bed.
• Only put a sheet or thin cotton spread over the blanket so that you can feel the heat and know whether the blanket is
creased or not.

CLEANING AND MAINTENANCE

When you are not using the heating blanket and before cleaning it, please follow the following instructions:
• Make sure the control is in «position 0».
• Disconnect the power supply.
• Disconnect the connector linking the control to the blanket.
• Leave the blanket to cool down before cleaning it.
4
Diagram and description:
5
1) «ON» heating light
4
2) Position «0» (= Off)
3
3) Position « 1 » (1 intensity)
st
4) Position « 2 » (2 intensity)
nd
5) Position « 3 » (3 intensity)
rd
Adjusting the temperature:
• Start by connecting the plug to the female input connector located on the side
of the blanket and the other end to the electricity supply (AC220-240V). Switch
the button to «position 2» so that the heating blanket reaches the desired
temperature more quickly. Leave it on for about 30 minutes before going to bed.
• When you want to go to bed, adjust the button to choose the temperature you
want. You can adjust the temperature to 3 different levels.
• We strongly recommend switching the blanket off by switching the button to
«position 0» before going to sleep (the indicator light goes off).