Power On/Off; Date/Time Setting - Olympus c-40 zoom Anleitung

GETTING STARTED (Cont.)

Power on/off

Shooting mode
1
Set the mode dial to the desired position.
2
Open the lens barrier.
●The camera turns on and the lens extends.
●Startup image is displayed on the monitor.
●If the lens does not extend, the lens barrier is not fully open.
3
Partially close the lens barrier to turn the camera off (about halfway
to the lens). Wait until the lens is retracted completely.
●Do not push the lens barrier against the lens.
4
Close the lens barrier all the way.
●The power turns off.
●Shutdown image is displayed on the monitor.
Playback mode
1
Press the
●The monitor turns on and startup image is displayed.
●If the lens barrier is open, press
mode.
2
Press the
●Shutdown image is displayed on the monitor, then the monitor turns off.

Date/time setting

1
Open the lens barrier to turn on the camera and enter the shooting
mode.
2
Press to display Menu.
3
í
Press on the arrow pad to select MODE MENU.
4
ñ
Press to select SETUP, then press
5
Ññ
Press to select
6
When is selected in green on the screen, press
date format.
●Select any one of the following formats:
DMY (Day/Month/Year)
MDY (Month/Day/Year)
YMD (Year/Month/Day)
●This step and the following steps show the procedure used when the date
and time settings are set to Y-M-D.
7
í
Press to move to the year (Y) setting.
18
(monitor) button.
button again.
, then press
twice quickly to enter the playback
í
.
í
.
Ññ
to select the