Olympus Camedia C-4040 ZOOM Anleitung Seite 7

Control panel indications
1
Flash mode
● Displayed when the flash mode is selected by pressing the
mode) button.
No indication: Auto-flash,
SLOW: Slow synchronization flash,
2
Manual Focus
● Displayed when locking focus using the Manual focus function.
3
Flash intensity control
● Displayed when the amount of the light emitted by the flash is adjusted.
4
Battery check
● When remaining battery power is low, the battery check indication
changes as follows:
Fully charged
● Be aware that the time when the battery check indication appears
varies depending on the type of batteries used.
5
Card error
● When the power is turned on, the camera checks the card. If there is a
problem with the card, this indication appears.
6
White balance
● Displayed when the White balance is set to any mode except AUTO.
7
ISO
● Displayed when the ISO is set to any mode except AUTO. When the
ISO is increased automatically in the AUTO mode, this indication blinks.
1
2
0
!
@
#
$ % ^ &
: Red-eye reduction flash,
Low power
3 4
5
6
7
8
9
: Off (flash override)
Blinks, then turns off.
(flash
: Fill-in flash,
No power
7