Cleaning The Permanent Filter And Microsan Filter In The Dust Container; Changing The Dust Bag - Bosch BSGL3-Serie Gebrauchsanleitung

25
Figure
26
Figure
Caution: the inside of the dust container may
!
become scratched with use and start to look
opaque. This does not, however, affect the perfor-
mance of the vacuum cleaner in any way, i.e. it will
continue to function as normal.
Cleaning the permanent filter and Microsan
filter in the dust container
The filters must be cleaned (wash out the filter sys-
tem):
At least every six months.
27
Figure
28
Figure
Malfunctions
29
Figure
Using dust bags
30
Figure
Open the dust bag compartment lid.
Remove the dust container and insert a dust bag.
Close the vacuum cleaner lid.
You have bought an extremely powerful device.
The highest suction setting is therefore only recommended
for heavily soiled, short-pile carpets and hard floors.
The required suction power can be selected by adjusting
the suction regulator (see Figure 9).
Low suction range:
For vacuuming delicate fabrics, e.g. curtains.
Middle suction range:
For daily vacuuming of lightly soiled floors.
High suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.

Changing the dust bag

Replacing the dust bag
31
Figure
a)
b)
32
Figure
33
Figure
a)
b)
!
Cleaning the motor protection filter
34
Figure