Troubleshooting - Lightmaxx Vega Haze 900 Bedienungsanleitung

Troubleshooting:

Hint! (Fault during data transmission)
Never connect the DMX input or output to audio devices such as power ampli-
fi ers or mixing consoles!
DMX cables enable interference-free operation and the highest possible trans-
mission reliability of signal data. Do not use microphone cables.
The following overview is intended as an aid to rapid troubleshooting. If you are unsure, contact
the manufacturer, the dealer or appropriate specialist personnel. Never open the device by yourself!
Symptoms
No Function
No Reaction in DMX Mode
No Reaction from Remote
Control
If the above troubleshooting has not been successful, please contact our service staff.
You can fi nd the contact details at www.musicstore.de.
Troubleshooting
Check the network connection and its fuse.
Check the cable connections
Check your DMX address settings
If available, try an alternative DMX controller
Change the battery in your remote control
Make sure that the IR transmitter and receiver are within
a short and clear distance of each other.
19