Troubleshooting Table - hanseatic HB6055K-GS Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem
The hand
blender isn't
working.
The cutting
blades are
jammed.
Heat, smoke
and an unusu-
al smell occur
while blending.
Possible cause
The hand blender
is locked.
You are trying to
blend too much
food.
The food is stick-
ing to the cutting
blades
You are trying to
blend too much
food.
You are using
the hand blender
longer than the
permitted period of
one minute.
The food you are
blending is too hot.
Troubleshooting table Page EN-19
Solutions, tips
Press the safety switch (1)
and then the power switch (2).
Reduce the amount of food.
Remove the drive unit and
free the cutting blades from
the food.
Reduce the amount of food.
Reduce the time to one min-
ute and then let the hand
blender cool down for at least
three minutes.
Make sure that the food is not
hotter than 60°C.