Using The Chopper - hanseatic HB6055K-GS Gebrauchsanleitung

Page EN-14 Operation
1. Attach the power unit to the
blending shaft (5) and turn
clockwise to lock.
2. To prevent splashing, insert
the blending shaft in the food
you want to purée before turn-
ing it on.
3. To switch on the hand blender,
hold down the safety switch (1)
and press the power switch (2).
4. Move the hand blender up and
down while puréeing.
Be careful not to immerse the
drive unit in food or fluid.
5. Release the power switch to
switch off the hand blender.

Using the chopper

NOTICE
Risk of damage!
Improper handling of the ap-
pliance may result in damage.
Do not use the chopper for
■
longer than 1 minute at a
time. Then let it cool down
for 3 minutes before using
it again.
You can use the chopper in order
to chop meat, cheese, vegetables,
herbs or nuts, for example.
For chopping meat, we recom-
mend chopping a maximum of
140 g of meat at once.
1. Insert the chopper (4) with the
cutting blades facing down-
wards into the small mixing
container (7).
2. Cut food into 1–2 cm pieces
and remove any hard parts
(e.g. bones and pits) before-
hand.
3. Put the food in the small mixing
container. Make sure that you
don't exceed the "Max"-mark-
ing on the mixing container.
MA A AX
4. Place the chopper attach-
ment (9) onto the chopper.
5. Make sure that the chopper
attachment clicks into place
with the chopper's slot.
6. Turn the chopper attachment
clockwise to lock it.
(9)
(7)
(4)