Troubleshooting Table - hanseatic MJ-BH1201W Gebrauchsanleitung

Troubleshooting table

Malfunctions can occur in all electrical appliances. This does not nec-
essarily mean there is a defect in the appliance. For this reason, please
check the tables to see if you can correct the malfunction.
WARNING
Risk of electric shock in case of improper repair!
Never try to repair a defective or suspected defective appli-
ance yourself. You can put your own and future users' lives in
danger. Only authorised specialists are allowed to carry out
this repair work.
Problem Possible cause
The hand The hand blender
blender isn't is locked.
working.
The cutting You are trying to
blades are blend too much
jammed. food.
The food is stick-
ing to the cutting
blades
Heat, smoke You are trying to
and an unusu- blend too much
al smell occur food.
while blending.
You are using
the hand blender
longer than the
permitted period of
one minute.
The food you are
blending is too
hot.
Troubleshooting table Page EN-19
Solutions, tips
Press the safety switch (1)
and then the power button (2).
Reduce the amount of food.
Pull the mains plug out of the
socket and then free the cut-
ting blades from the food.
Reduce the amount of food.
Reduce the time to a maxi-
mum of one minute and then
let the hand blender cool down
for at least two minutes.
Make sure that the food is not
hotter than 60°C.