Factory Reset - Ape Labs APE FORCE ONE Bedienungsanleitung

ape labs apeforceone user manual
14
GENERAL SETTINGS
TRANSMIT MODE
1. SEND ON MODIFY: transmits changed values immediately
2. SEND ON ENTER: transmits changed values after pushing the
„SEND" button
SEND TO TYPE: Set of receiving unit by choosing the lamp type
(mobilight, apestick, etc.)
SEND TO S/N: Set of receiving unit by choosing the serial number
AUTO SETTINGS
PROGRAM: Select pre-set programs (20)
INTENSITY: Adjust brightness (0 % - 100 %)
SPEED: Set speed of program (90 ms - 9.21 min)
FADE: Set fade time in programs (0% - 100%)
DIRECTION: Set program direction (forward, backward, repeat)
USER COLORS: Setting colors used in programs.
STROBOSCOPE: Push the "BRIGHTNES" button for 2 seconds
and set your strobe value.
INFO
FIRMWARE VERSION: Firmware version
RF LINK: type of frequency band

FACTORY RESET

If you are confused about your settings, you can perform a factory reset.
No programs or the like will be deleted, only your personal settings.