Ape Labs APE FORCE ONE Bedienungsanleitung Seite 13

BLUE SETUP
REMOTE-ACTIVATE: NC
REMOTE-DEACTIVATE/
NC INPUT SELECT: Setting source of receiving per radio transmission
DMX ADDRESS: Setting of DMX address per radio transmission
CHANNELS: Depends on ape labs product
DMX TAB: Select DMX mode (RGBWS, EFFECT MODE FIX,
EFFECT MODE RGBW)
STROBE: Turn strobe channel on/off in RGBWS DMX mode
DMX FAILURE: What to do if there is no DMX signal?
USE WHITE LEDS: The white LEDs are activated by an RGB mixed
color (saves battery life)
LED POWER: Increase battery life by dimming the LEDs
WHITE CORRECTION: Turn color correction adjustment on/off
WHITE CALIB RED: Adjust color correction – applies to all colors or
programs
WHITE CALIB GREEN: Adjust color correction – applies to all colors or
programs
WHITE CALIB BLUE: Adjust color correction – applies to all colors or
programs
AC FAILURE: What to do if there is no power?
(ape lamp operated by charging adapter )
CHAIN SIZE : Size of lamps- chain (up to 32 units)
POS IN CHAIN: Position of lamp in chain – (from left to right)
SET PIX SIZE: Setting of pixelsize (while using programs)
SET START PIX: Setting of startpixel (while using programs)
NUMBER OF SET: NC
REMOTE GROUP: Assigning of the group (1-4) per radio transmission
ape labs apeforceone user manual
13