Installing; Cleaning Before Use - Norpe AIDA Bedienungsanleitung

PI

2.6. Installing

1. Set the cabinet in its place.
2. Adjust the cabinet to stand perpendicularly using the
adjustable legs.
3. Ensure that the airflow to the condenser unit is not
obstructed.
When installing the cabinet, make sure of the following:
• The area where the cabinet is placed is flat and level.
• The cabinet is not placed in the immediate vicinity of
a heat source such as a radiator, air blown heater or
spotlight. See figure A.
• The cabinet is not exposed to direct sunlight. If
necessary, use blinds in any nearby window. See
figure B.
• The air conditioning for the premises does not blow onto the cabinet. See figure C.
The correct positioning of the cabinet optimises temperature conditions and performance,
thus helping save energy and elongate the service life of the cabinet.
Cabinets with castors / wheels may be anchored to the wall behind them as a safety
precaution.

2.7. Cleaning before use

1. Clean the cabinet surfaces and the storage compartment for foodstuffs with a mild liquid
detergent (pH 6-8) before using the cabinet.
Follow the instructions provided with the detergent.
NOTE
Version 1/2011
Make sure that all cleaning fluids are classed as non-toxic.
ENGLISH
5